BROWN BOGGS 188-H HAND BRAKE
8' x 18 ga. m.s. capacity (angle bar not included so capacity is actually 22 ga.)
You can add an angle bar if more capacity is needed.
1-7/8" clearance through top opening, 135 deg. maximum angle bend,
Weight approx 1,425 lbs.
Serial #70401 (1970)
IN STOCK...................................................................$3,500.00 (used)
BROWN BOGGS 188-H HAND BRAKE
8' x 18 ga. m.s. capacity (angle bar not included so capacity is actually 22 ga)
You can add an angle bar if more capacity is needed.
1-7/8" clearance through top opening, 135 deg. maximum angle bend
Weight approx 1,425 lbs.
Serial #76423 (1976)
IN STOCK............................................$3,500.00 (used)
ROPER WHITNEY/CONNECTICUT 816 HAND BRAKE
No angle iron so capacity is lowered to 20 ga., 1/4" minimum reverse bend, 1-5/8"
maximum lift of beam, 1-1/8" front to rear adjustment of beam.
Weight: 1,640 lbs.
Serial #n/a)
IN STOCK..............................................$3,000.00 (used) - AS IS, WHERE IS
ROPER WHITNEY/CONNECTICUT 1016 HAND BRAKE
10 ft x 16 ga. m.s. capacity, 1/4" minimum reverse bend,
2-1/4" max. lift of beam, 1-3/8" front to rear adjustment of beam
Approx weight: 2,660 lbs.
Serial #4373-8-08 (2008)
IN STOCK...............................................$6,500.00 (Used)
BROWN BOGGS 1610H PLAIN LEAF BRAKE
10' x 16 ga m.s. capacity with reinforcing angle bar in place
10' x 20 ga. s.s. capacity with reinforcing angle bar in place
2-1/4" clearance through top opening, 135 degree max
angle bend, Weight approx 3,000 lbs. Serial #81368
IN STOCK...................................$7,900.00 (used)
TINKNOCKER LETTER BRAKE
20 ga. m.s. capacity
Foot operated clamping leaves both hands free
Designed to bend sheet metal strips with one or more bent up
edges or existing seams. Can also bend 12" of straight
sheet metal.
Make can letters and more.
VAN MARK PORTABLE BRAKES
2' to 12'6" lengths, .024 to .050 aluminum capacities, 20 to 28 ga. galvanized capacities.
TINKNOCKER PLAIN LEAF BRAKE
Model TK422: 4' X 22 ga.
Model TK622: 6' x 22 ga.
TINKNOCKER BOX & PAN BRAKES, BENCH MODELS
48" X 22 GA., 48" X 16 GA.
TINKNOCKER TK616 UNIVERSAL BRAKE
Box and pan fingers up top and segmented, relocatable
bend apron tooling below. Flange down bends, transverse
duct forming, etc.
6' x 16 ga. with lower tooling flanges
6' x 20 ga. without lower tooling flanges
1/2" front to rear adjustment
5/8" minimum reverse bend
1" minimum flange width
1", 3" and 4" finger widths
Lower segment tooling widths and segmented bending beam tooling lengths of 1", 1.5", 4", 6", 8", 12" and 20"
TINKNOCKER FLOOR MODEL PLAIN LEAF BRAKES
8' X 16 ga, 10' x 16 ga/
Print 